This Wireling uses the AST7525MATRQ buzzer to give you the ability to add a variety of tones to your next project!

 

 AST7527MATRQ Specs

• Oscillation frequency 2700Hz
• Sounds pressure level 85 dB/min at 10cm

TinyDuino Power Requirements

• Voltage: 3.0V - 5.5V 
• Current:  100mA (Max Rating).

Pins Used

• A5/SCL - I²C Serial Clock line
• A4/SDA - I²C Serial Data line 

Dimensions

• 10mm x 10mm (.394 inches x .394 inches)
• Max Height (from the lower bottom of Wireling to upper top Wireling Connector): 6.25mm (0.25inches)
• Weight: 1 gram (.04 ounces)

 

You can also use this shield without the TinyDuino – modifying the connecting cable by removing the opposite connector and stripping/tinning the wires, you can solder the connector cable to any other microcontroller board of your choice!