This Wireling features a 3.5mm Serial RGB LED, enabling you to add 24-bit resolution color to your Tiny Project! This LED has a built-in driver IC, so it requires special libraries and serial data, not just applied voltage. This Wireling also features a second connector, allowing you to string multiple LEDs together!

 

SK6812 Mini Specs

  • Built-in power-on reset and reset circuit
  • Refresh rate 30 frames per second with data transmission frequency of 800 Kbps
  • 24-bit resolution color

Power Requirements

  • Voltage: 3.0V - 5.5V 
  • Current: (depends on color and brightness)
    • Red: 30mA
    • Green: 20mA
    • Blue: 30mA
    • White: 65mA

Pins Used

  • A5/SCL - I²C Serial Clock line
  • A4/SDA - I²C Serial Data line 

Dimensions

  • 10mm x 11mm (.393 inches x .433 inches)
  • Max Height (from lower bottom of Wireling to upper top Wireling Connector): 4.70mm (0.19 inches)
  • Weight: 1 gram (.04 ounces)

 

You can also use this shield without the TinyDuino – modifying the connecting cable by removing the opposite connector and stripping/tinning the wires, you can solder the connector cable to any other microcontroller board of your choice!

Add projectSign up / Login